Outdoor sensor flood lights are an essential accessory for any homeowner who wants to keep their property safe and secure. They are ideal for illuminating large outdoor spaces, highlighting landscaping features, and deterring intruders.
But, installing outdoor sensor flood lights can be daunting, especially if you are an inexperienced DIYer. Thankfully, this comprehensive guide provides everything you need to know about outdoor sensor flood light installation.
1. Choose the Right Location
Before installing outdoor sensor flood lights, you need to determine the right location. It is essential to choose a location that is both convenient and safe. For instance, you may want to install outdoor sensor flood lights at the entrance of your property or underneath a porch roof.
Ensure the location you choose is close to a power source. If there are no convenient power sources, you may need to install new electrical wiring. This will require the services of a licensed electrician.
2. Preparation
Once you have chosen the location, it is time to prepare the area for installation. First, turn off the power to the circuit that the lighting fixture will be connected to. This is done by tripping the circuit breaker at the breaker box.
Next, gather all the necessary tools and equipment, including a ladder, a drill, a screwdriver, and a voltage tester. For safety reasons, wear protective gear such as gloves and safety glasses.
3. Mount the Fixture
To mount the fixture, first, assemble its parts as instructed in the manufacturer’s manual. Once the fixture is fully assembled, climb the ladder and mark the location where the fixture will be mounted.
Drill the necessary holes, and attach the fixture according to the manufacturer’s instructions. Ensure that the fixture is level, and adjust it if necessary.
4. Wiring
Finally, it is time to wire the sensor flood light. This part of the installation can be dangerous, so it is essential to take all necessary safety precautions. First, confirm that the circuit breaker is still in the OFF position.
Next, use a voltage tester to check that the wires are not live. Connect the wiring according to the manufacturer’s instructions, and ensure that all the connections are secure.
After wiring the fixture, turn on the circuit breaker to test the light. If the light turns on, climb back up the ladder and adjust the sensor flood light’s sensitivity and range as needed.
Conclusion
Installing outdoor sensor flood lights can seem intimidating, but with the right tools and knowledge, it is a simple task. Follow the above tips and tricks, and be sure to read the manufacturer’s manual carefully.
With your new outdoor sensor flood lights in place, your property will be beautifully illuminated and protected from unwanted visitors.